Funkwerk RTH80

Description

The RTH80 is a 1090MHz Extended Squitter ADS-B /Mode S receiver complying with the basic requirements of RTCA DO-260A. The unit operates from any DC power supply between 10 and 16 V DC.It requires an external passive antenna.

The RTH80 receives ADS-B reports and performs decoding and checking of message validity. Valid ADS-B reports are passed on to a connected device for further processing, storage or display.

The unit has the basic capabilities of an ADS-B Class A0 receiver and provides reliable reception down to a mimimum signal strength of -78dBm.

The RTH80 provides error detection based on the standard Mode S CRC-24 and preamble detection. The detected messages are transmitted as raw data via RS-232, USB or Ethernet TCP/UDP Broadcast Protocol.

Features

• Class A0 1090MHz ADS-B receiver
• Reception of all Mode S downlink formats
• Sensitivity: -78dBm (Minimum trigger level, MTL)
• Compliant to the basic requirements specified in RTCA DO-260A
• Checking of message validity, error detection based on the standard Mode S CRC-24 and preamble detection.
• The received messages can be passed on via RS-232 serial line, USB or a fast Ethernet Interface via TCP/UDP Protocol.
• Flexible interface configuration via network interface using a web browser or via a terminal emulator.
• Optional internal filtering according to message types.

Technical Data

• Dimension: 174 x 124 x 39 mm
• Weight: 700 g
• Power supply voltage: nom. 13,8 V DC (10...32V)
• Current: 200 mA at 13.8V
• Antenna connector: TNC (Male)
• Data Interfaces: USB, seriell (RS232), Ethernet 10/100MBit
• Standards: RTCA DO-260A, RTCA DO-160G, RTCA DO-178B Level E