Features
- Trim Servo used for elevator trimming
- Contains a servo motor with amplifier and an engage clutch solenoid
- Is installed with a KM 275 servo mount, which contains a slip clutch
- The servo receives a differential command input and drives the servo motor with a speed proportional to the magnitued of the command
- The command polarity will determine direction of the servo rotation
- The command inputs have an impedance of at least 15K ohms
Specifications
- Size: 3.925"W x 4.675"H x 4.605"L
- Mounting: Two (2) AN 3 bolts
- Power Inputs: +28VDC at 4.0 amps
- Clutch Engage Signal: +28VDC (active high input) and Ground (active low input)
- Weight: 2.1lbs.
- Mating Connector: 030-03248-0000
- Signal Inputs: -10VDC to +10VDC
- Signal Outputs: Trim Voltage: -28VDC to +28VDC Trim Sense: -3VDC to +3VDC
Part Number | Trim Servo Description |
---|---|
065-00180-0400 | 2.4 RPM |
065-00180-0600 | 14.6 RPM |
065-00180-1400 | 22 RPM |
065-00180-2700 | 3.6 RPM |
065-00180-3500 | 4.7 RPM |